1995 Mercedes-Benz E320

20 CommentsPosted as: ClearPOST COMMENT June 19th, 2025 at 4:34pm EST$13,588 bid placed by @dadishortlegsJune 19th, 2025 at 4:32pm EST$13,250 bid placed by @BENZ_NWJune 19th, 2025 at 4:31pm EST$12,888 bid placed by @dadishortlegsJune 19th, 2025 at 4:29pm EST$12,500 bid placed by @BENZ_NWJune 19th, 2025 at 4:28pm EST$12,250 bid placed by @MziouJune 19th, 2025 at 4:27pm EST$12,000 bid placed by @BENZ_NWJune 19th, 2025 at 4:26pm EST$11,688 bid placed by @dadishortlegsJune 19th, 2025 at 4:25pm EST$11,250 bid placed by @BENZ_NWJune 19th, 2025 at 4:24pm EST$11,000 bid placed by @MziouJune 19th, 2025 at 4:23pm EST$10,750 bid placed by @BENZ_NWJune 19th, 2025 at 4:23pm EST$10,250 bid placed by @BENZ_NWJune 19th, 2025 at 4:23pm EST$10,500 bid placed by @MziouJune 19th, 2025 at 4:23pm EST$9,888 bid placed by @dadishortlegsJune 19th, 2025 at 4:20pm EST$9,500 bid placed by @BENZ_NWJune 19th, 2025 at 4:17pm EST$9,000 bid placed by @Surprise1June 19th, 2025 at 3:44pm EST$8,750 bid placed by @arpaziJune 19th, 2025 at 3:43pm EST$8,500 bid placed by @ckolmersJune 19th, 2025 at 3:31pm EST$8,250 bid placed by @MziouJune 19th, 2025 at 3:10pm EST$7,750 bid placed by @BENZ_NWJune 19th, 2025 at 2:37pm EST$7,000 bid placed by @ChoppedJune 19th, 2025 at 1:55pm EST$6,500 bid placed by @Surprise1June 19th, 2025 at 1:53pm EST$6,250 bid placed by @CMiles78June 19th, 2025 at 1:37pm ESTthembmarket (691) 0Videos have been added to the listing. June 19th, 2025 at 12:03pm EST$6,000 bid placed by @ChoppedJune 19th, 2025 at 12:13am ESTE36W124 (0) Seller 0@jago_mb I have videos if anyone would like to reach out. I will try to add them to the listing tomorrow morning if it’s not too late. Pictures 105-107 are the control arm bushings below the car and are showing that they are in great condition, not cracked, and crumbing and torn. They are fresh. A properly maintained Mercedes engine hardly loses any HP, especially under 100k miles. I really don’t think getting a dyno for a 268hp car is necessary. It’s not a crazy amount of HP I’m claiming. Thanks for your comment. June 18th, 2025 at 8:28pm ESTjago_mb (4) 0@E36W124 please look at pics 105-107. that's what i refer to as a "tear" but i'm not sure what we are looking at there. ps yes you are quoting the out of the box new hp but a 90k mile swap into another car, likely heavier, might tell a different story. you can stand pat on it but you'd get better $$ if more transparent. and i reiterate a video of start and driving would also help. June 18th, 2025 at 7:16pm ESTE36W124 (0) Seller 0@Dunlopilo not difficult at all, parts are still available for the C36 which shares engines with this car, and also majority of the parts on this engine are the same as the E320 3.2 engine since it is that same engine but bored out to 3.6 and had some head work by AMG. June 18th, 2025 at 7:15pm ESTE36W124 (0) Seller 0@jago_mb 18 inch is definitely the largest wheel I’d put on a W124 so yes I do think some people would think this week is big but I think it’s beautiful.. yes the suspension has been replaced with Mercedes original struts as shown in the pics. Not sure what torn pieces you’re referring to, I don’t see anything torn on the car. This engine is the exact engine in the C36, the HP they produce is very well known and documented at 268hp and 280 tq. June 18th, 2025 at 6:19pm ESTDunlopilo (2) 0How difficult would it be to get parts for this car when it becomes necessary? June 18th, 2025 at 2:37pm ESTjago_mb (4) 0wheels look too big on this car. what is the info on suspension? original? what are the torn pieces shown? clearly i am not a mechanic but a video and a run on the dyno would also be helpful in this presentation. regards, johnJune 18th, 2025 at 1:46pm EST$5,250 bid placed by @CMiles78June 18th, 2025 at 9:00am ESTE36W124 (0) Seller 0@Toni1990 No sir, the Car was put together less than 1k miles ago. the center AC vent barley blows for some reason, seems like most of the air is funneled through the rest of the vents. the AC works and is cold. And the steering wheel has a leather squeak when turning when its super hot out for some reason. sounds like leather on leather contact. When it's not hot out it doesn't make the sound. mechanically, I wouldn't hesitate to drive the car across the country tomorrow. June 18th, 2025 at 1:41am ESTToni1990 (0) 0Any immediate maintenance that needs to be addressed?June 16th, 2025 at 5:36pm EST$5,000 bid placed by @MziouJune 12th, 2025 at 10:31pm ESTStan_Lution (19) 1Great build! To me, this perfectly embodies the OEM+ theme with the 3.6 adding a touch of retromod flair.June 12th, 2025 at 12:00pm ESTgsxr (105) 0It's not a torque concern on the wheel bolts. Wheels designed for the 140 chassis (and, many newer chassis) use M14 bolts with R14 ball seat radius. If you use an M12 bolt with R12 ball seat on a wheel with R14 seat, there is very little contact area between the R12 ball and R14 seat.June 11th, 2025 at 4:01pm ESTE36W124 (0) Seller 0@harry19 that’s very weird. I’ll check the torque on the bolts when I get home from the office today but this is definitely the first I hear of this issue. I know of a few people running them on 500Es as well, no issues. June 11th, 2025 at 3:50pm EST$4,250 bid placed by @harry19June 11th, 2025 at 3:50pm ESTharry19 (21) 0Thanks for your prompt response! I had a very sketchy experience with these exact wheels on an m12 car. Nevertheless ended up buying new hubs all around and machining out to m14. The m12 hardware would get loose after driving 6-7 miles even after torquing June 11th, 2025 at 3:48pm ESTMziou (0) 0A Green W124 and it’s a 3.6??!June 11th, 2025 at 3:37pm EST$4,000 bid placed by @MziouJune 11th, 2025 at 3:14pm ESTE36W124 (0) Seller 0@harry19 I used the stock W124 Bolts, no spacers needed. The bolt sits in the wheel pocket perfectly and the M12 is what the W124 calls for. Bolts torqued down to 110NM. I understand these wheels were originally for W140 but they have the same hub size, bolt pattern, and offset tha